This is an optional system add-on unit for applications that require remote passive monitoring of the 16IO-SSRT-09HP wireless I/O extension system. The 16IO-SSRT-090HPM, in appearance, is identical to the 16IO-SSRT-09HP modules, but runs a special firmware revision. The module functions as a receiver only, and is user configured to monitor the I/O states of the system’s master unit or the slave unit. In either master or slave monitoring mode, the 16IO-SSRT-09M will reproduce (as outputs) the state of the inputs of the master or slave 16IO-SSRT-09 transceivers.

The 16IO-SSRT-09M is typically used at a third remote location to passively monitor the state of the master or slave 16IO-SSRT09 units in service at other remote locations. 

• Expansion module for multipoint monitoring of the 16IO-SSRT-09HP wireless I/O extender modules
• Identical to the 16IO-SSRT-09HP IO extender modules but behave as monitor-only nodes 
• Features 8 discrete digital outputs and 8 open collector outputs. Inputs and TX functions are disabled
• User configurable to monitor either the 16IO-SSRT-09HP master unit or remote slave unit 
• Output states may be configured to be TRUE or INVERTED
• Output Status LED's, Power and RF communications LED's
• Self supervising RF link with user configurable timeout function
• Alarm relay output upon RF link failure at timeout
• Excellent noise immunity
• 902-928MHz Spread Spectrum FM architecture
• Range of up to 40 miles with gain antenna (ordered seperately: please call or email)
• Range of up to 10 miles with 1/2-900-RPSMA antenna (see options below)  
• Simple to interface to PLC's and other hardware devices
• Ideal for long range standalone RF remote monitoring system
• Also available in a lower power 4mW and 100mW versions
• 7.5Vdc-16Vdc operation

    data sheet

Quantity Prices

(what's this?)