This is an optional system add-on unit for applications that require remote passive monitoring of the 16IO-SSRT-09 wireless I/O extension system. The 16IO-SSRT-09M, in appearance, is identical to the 16IO-SSRT-09 modules, but runs a special firmware revision. The module functions as a receiver only and is user configured to monitor the I/O states of the system’s master unit or the slave unit. In either master or slave monitoring mode, the 16IO-SSRT-09M will reproduce (as outputs) the state of the inputs of the master or slave 16IO-SSRT-09 transceivers.
The 16IO-SSRT-09M is typically used at a third remote location to passively monitor the state of the master or slave 16IO-SSRT09 units in service at other remote locations.
Expansion module for multipointmonitoring of the 16IO-SSRT-09 wireless IO extender modules
Identical to the 16IO-SSRT-09 I/O extender modules but configured as monitor-only nodes
Features 8 discrete digital outputs and 8 open collector outputs. Inputs and TX functions are disabled
User configurable to monitor either the 16IO-SSRT-09 master unit or slave unit
Output states may be configured to be true or inverted
Output Status LED's, Power and RF communications LED's
Self supervising RF link with user configurable timeout function
Alarm relay output upon RF link failure at timeout
Excellent noise immunity
902-928MHz Spread Spectrum FM architecture
Range of up to 20 miles with gain antenna (ordered seperately: please call or email)
Range of up to 1000' with 1/2-900-RPSMA antenna (see options below)
Simple to interface to PLC's and other hardware devices
Ideal for long range standalone RF remote monitoring system
Also available in higher power 100mW version and 1 Watt version